Eizo FlexScan EV2750 User Manual page 37

Problem
5. Green / red / blue / white dots or dark dots
remain on the screen.
6. Interference patterns or pressure marks
remain on the screen.
7. Noise appears on the screen.
8. (When using DisplayPort signal input)
Position of windows and icons is shifted
when turning power off/on or recovering
from power saving mode.
• This is due to LCD panel characteristics and not a malfunction.
• Leave the monitor with a white or black screen. The symptom may disappear.
• In the Setting menu, set "Overdrive" to "Off" (see
• When inputting HDCP system signals, normal images may not be displayed immediately.
• Set the "Compatibility Mode" setting to "On" using one of the following methods.
- Change the setting using the operation switch on the front of the monitor.
1. Turn on the monitor.
2. When the operation guide is not displayed, touch the leftmost switch for more than 3 seconds.
Each time an operation is executed, the setting changes between On/Off.
(When the setting changes, "Compatibility Mode : On" / "Compatibility Mode : Off" is displayed on screen.)
- Change the setting for "Compatibility Mode" on the "Administrator Settings" menu (see
33)).
- 37 -
Possible cause and remedy
"Overdrive" (page 24)).
Chapter 5 Troubleshooting
"Compatibility Mode" (page