Eizo FlexScan EV2750 User Manual page 22

(Functions that can be adjusted differ
depending on the color mode.)
Function
√: Adjustable -: Not adjustable
User1
sRGB
User2
Screen Selection
Color Mode √
Brightness √
Color Mode
Setting Range
Paper Movie DICOM
Left Screen
Right Screen
Whole Screen
√ √ √ √ User1
User2
sRGB
Paper
Movie
DICOM
√ √ √ - 0 to 100
Description
Enabled only during PbyP display.
Select the application range for each setting of
the color adjustment.
When using PbyP display, select this range first.
• "Left Screen"
The setting is applied only to the left screen.
• "Right Screen"
The setting is applied only to the right
screen.
• "Whole Screen"
The setting will be applied to both the left
and right screens.
Select the desired mode according to the
monitor application.
The color setting status can also be adjusted
according to personal preference. Select the
mode for adjustment and perform adjustment
using the relevant functions.
The screen brightness is adjusted by changing
the brightness of the backlight (light source from
the LCD back panel).
- 22 -
Chapter 3 Advanced Adjustment/Setting
Note
For details on PbyP, see "2-2.
Switching Input Signals" (page
14).
• For details on the adjustment
status of each mode, see "2-
3. Switching Display Modes
(Color Modes)" (page 15).
• If the image is too dark even
when the brightness is set to
100, adjust the contrast.