Functions Of The "Administrator Settings" Menu - Eizo FlexScan EV2750 User Manual

4-2. Functions of the "Administrator Settings" Menu

Function
Auto Input Detection On
Off
Compatibility Mode On
Off
Setting Range
This monitor recognizes the connector through which PC signals
are input and displays images on the screen accordingly. When a
PC is turned off or enters power saving mode, any other available
signal is displayed automatically.
When this function is set to "Off", the monitor displays the signal
from the selected connector regardless of whether a signal is
input or not. In this case, select the input signal to display using
the operation switch on the front of the monitor.
When a PC is connected via the DisplayPort connector, window
and icon positions may shift when power is turned off/on or after
recovering from power saving mode. If this happens, set this
function to "On".
Description
- 33 -
Chapter 4 Administrator Settings
Note
• When set to "On", the monitor only enters power
saving mode after all connected PCs have entered
power saving mode or have been switched off.
• This function is not available during PbyP display.
• This setting can also be changed using the
operation switches on the front of the monitor.
1. Turn on the monitor.
2. When the operation guide is not displayed,
touch the leftmost switch for more than
3 seconds.
Each time an operation is executed, the setting
changes between On/Off.
(When the setting changes, "Compatibility
Mode : ON" / "Compatibility Mode : Off" is
displayed on the screen.)