Eizo FlexScan EV2750 User Manual page 29

Function Setting Range
Power Save On
Off
Eco Timer Off
0, 1, 2, 3, 5, 10, 15,
20, 25, 30, 45 min,
1, 2, 3, 4, 5 h
Power Indicator On
Off
Audio Selection (PbyP) Left Screen
Right Screen
Monitor Reset -
Description
The monitor can be set to enter power saving mode according to
the state of the PC.
The monitor changes to power saving mode about 15 seconds
after signal input ceases to be detected.
When the monitor has shifted to power saving mode, images are
not displayed on the screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power
saving mode and returns to the normal display mode.
The monitor can be turned off automatically after a specified
amount of time has passed in power saving mode.
Select the time to wait before turning off power to the monitor.
The power indicator (white) can be turned off during screen
display.
Select the source of audio to output from the monitor during PbyP
display.
• "Left Screen"
Outputs the audio source from the left screen.
• "Right Screen"
Outputs the audio source from the right screen.
Restore all settings to their default values except for the following
settings.
• PbyP Picture Setup
• Settings on the "Administrator Settings" menu
- 29 -
Chapter 3 Advanced Adjustment/Setting
Note
• At the time of shifting to power saving mode, a
message that indicates the transition is displayed
5 seconds in advance.
• During PbyP display, the monitor only enters power
saving mode after both PCs have entered power
saving mode or have been switched off.
• When not using the monitor, you can turn off the
main power supply or disconnect the power plug so
that the power is cut completely.
• When the monitor is in power saving mode, devices
connected to the USB downstream port will still
work. Therefore, power consumption of the monitor
varies with connected devices even in power saving
mode.
• Power consumption varies even when the stereo
mini jack cable is connected.
-
-
-
• For details on default settings, see
Settings" (page 51).
"Main Default