Canon iPF780 User Manual page 463

iPF780
System TrimEdge Reload
Setup
Rep.P.head Print
Nozzle Check
Use USB
Use Ethernet
Use RemoteUI
Reset PaprSetngs
Show Job Log
Prep.MovePrinter
Admin. Change Password
Menu
Init.Admin.Pswd
User's Guide
Setting Item Description, Instructions
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting Auto-
matic will trim the edge when the roll has been in the re-
tracted position for two days or more.
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.522
➔
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of nozzle
use. Choose 1 page to check once per page. Choose 10
pages to check once per 10 pages. Choose Off to not exe-
cute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
When Off is selected, the device can no longer be ac-
cessed via USB.
When Off is selected, the device can no longer be ac-
cessed via Ethernet.
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Selecting Off prevents display of the log in Job Menu >
Job Log. Additionally, the log is not printed if you choose
Job Menu > Print Job Log. Note that because job logs are
not collected, the Status Monitor accounting functions will
not work correctly.
When transferring the printer to another location, choose
the level of transfer and follow the instructions on the
screen. (See "Preparing to Transfer the Printer.")
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
The password that can be entered is a number from 0 to
9999999.
The restriction states and main items are shown below. For
more specific information on restricted items, see "Menu
Structure."
P.448
➔
• Viewing and configuration by administrators only
Change Password
Init.Admin.Pswd
Etc.
• Viewing and configuration by administrators, and only
viewing by other users
Date & Time
Time Zone
Use RemoteUI
Etc.
Choose OK to restore the Admin. Menu password to the
default values.
Menu Settings
P.566
➔
463