Printing On Paper Other Than Genuine Paper And Feed Confirmed Paper Using Existing Settings - Canon iPF780 User Manual

iPF780
• If you use paper other than genuine Canon paper and feed confirmed paper, Canon provides absolutely no guaran-
tees regarding print quality or paper feed properties. Refer to Paper Reference Guide for details on genuine Canon
Important
paper and feed confirmed paper. (See "Displaying the Paper Reference Guide.")
Load paper in the printer and then select the paper type in the control panel and printer driver and print.
You can print easily by selecting from existing settings provided in the printer control panel and printer driver. (See

"Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings.")

Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings
Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings
You can easily print on paper other than genuine Canon paper and feed confirmed paper without making complicated
settings by selecting existing settings provided in the printer control panel and printer driver depending on the media
type you are using. The existing settings consist of general-purpose paper settings provided for each media type and
special settings that allow you to select the amount of ink to use.
• The genuine Canon paper settings provided in the printer control panel and printer driver are optimized for genuine
Canon paper. If these settings are selected for printing on paper other than genuine Canon paper, the ink may bleed
Important
or the printhead may rub against the paper. In order to easily print on paper other than genuine Canon paper and feed
confirmed paper, we recommend that you select one of the following general-purpose paper settings or special set-
tings.
• For an overview of the media types, see "Types of Paper."
Note • For details on how to select the media type in the control panel and printer driver, see "Types of Paper."
Choosing General-Purpose Paper Settings
Since these settings anticipate a wide variety of paper other than genuine Canon paper and feed confirmed paper,
these settings will make it difficult for bleeding ink and the printhead rubbing to occur. Refer to the following table for
the relationships between the conditions of the paper other than genuine Canon paper and feed confirmed paper and
the media type to select.
Type Approximate weight Approximate thickness
Plain Paper 70 g/m²
Coated Paper 90 g/m²
170 g/m²
Photo Paper 180 g/m²
260 g/m²
Proof 80 g/m²
Sign/CAD Paper 150 g/m²
90 g/m²
100 g/m²
*1: Print using slightly less ink. Try this if you are concerned about rubbing of ink after printing.
*2: Software RIP is required separately.
Selecting Special Settings
Special settings are provided that allow you to select the amount of ink used in steps. You can fix lackluster colors or
bleeding ink by selecting special settings where the amount of ink used is suitable for the paper you are using.
User's Guide
Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings
Printer control panel
0.09 mm (0.0035 in.) Plain Paper
0.13 mm (0.0051 in.) LW. Coated Paper
0.22 mm (0.0087 in.) HW. Coated Paper
0.18 mm (0.0071 in.) LW. Photo Paper
LWPhotoPaper(LI)( *1 )
0.26 mm (0.010 in.) HW. Photo Paper
HWPhotoPaper(LI)( *1 )
0.10 mm (0.0039 in.) News Proof
0.11 mm (0.0043 in.) CAD Clear Film
0.08mm (0.0031 in.) CAD Trce(LowInk)
0.13 mm (0.0051 in.) Syn.Papr(LowInk)
P.364
➔
P.360
➔
Printer driver
Plain Paper
Lightweight Coated Paper
Heavyweight Coated Paper
Lightweight Photo Paper
Lightweight Photo Paper (LowInk)( *1 )
Heavyweight Photo Paper
Heavyweight Photo Paper (LowInk)( *1 )
( *2 )
CAD Clear Film
CAD Tracing Paper (Low Ink)
Synthetic Paper (LowInk)
P.363
➔
P.360
➔
363