Canon iPF780 User Manual page 459

iPF780
GL2 Set- Quality Color
tings Manager Mode
Print Quality
Input Resolution
Print (Economy)
Paper Paper Source
Manager
Margin
Conserve Paper
Auto Rotate
Line & Enable merge
Pen
Manager
Pen Set-
up
User's Guide
Setting Item
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Select Palette
Define Palette
Description, Instructions
Print with approximate colors emulating Canon iPF500,
iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720,
iPF810, iPF820, iPF815, iPF825.( *2 )
Print emulating the HP Designjet 500/800, in colors resem-
bling colors produced by these printers.( *2 )
Print emulating the HP Designjet T1100, in colors resem-
bling colors produced by this printer.( *2 )
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
When On is selected, print using less ink.
However, the quality is lower than regular printing.
Select On to conserve ink such as the layout confirmation.
Note that although Print (Economy) is only available when
Fast is selected in Print Quality, it might not be available
depending on the paper type.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the larger of the setting values has priority.
Conserves paper when printing.
If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, im-
ages may be cut off or the blank paper may be ejected. In
this case, set Auto Rotate to Off.
Specify whether to merge or print over colors where lines
overlap.
Choose Off to print the second line over the first. Choose
On to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value
specified in Define Palette.
Specify the Width, Color, and Line Attributes in the pa-
lette Pen no.. Choose Factory to confirm the values when
Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting as
the processing for the ends and junctions of lines.
• If you choose No Setting
Menu Settings
459