Canon iPF780 User Manual page 353

iPF780
• Paper Size
You can select the size of the print media.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Note
• Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from the
edges of roll paper.
• This feature is useful when you print the document enlarged or reduced with Scaling as well. When an image is
scaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of the page. If the
Note
image is reduced, the bottom and right margins are enlarged and the top and left margins remain unchanged. At
that point, you can set all margins evenly with this feature.
• No Spaces at Top or Bottom
You can set the printer to print without any empty area when the print data contains empty area at the top or bot-
tom. Since the printer does not feed paper over the empty area, you can save paper.
• Available only if rolls are selected in Paper Source.
Note
• Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
Setting
Rotate Right 90 Degrees
Rotate Left 90 Degrees
Rotate 180 degrees
• Available only if rolls are selected in Paper Source.
Note
User's Guide
Rotates the portrait page right 90 degrees and print in landscape orientation. When the rota-
ted page can fit in the width of roll paper, the page is rotated automatically, and when it can
not fit in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the image
is enlarged or reduced after rotating to fit the width of the roll paper.
Rotates the portrait page left 90 degrees and print in landscape orientation. When the rotated
page can fit in the width of roll paper, the page is rotated automatically, and when it can not fit
in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the image
is enlarged or reduced after rotating to fit the width of the roll paper.
Allows you to rotate the image 180 degrees from the vertical to the right.
Output Settings Panel
Details
353