RM-180
BB Troubleshooting and Tuning Guide
Programming is completed when
The product type designator and MCU SW version are displayed in the status bar.
SW Update window and then choose File→Close Product .
vi Close the
Request file.
2. Create a
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i
To connect the phone with
ii Choose Tools→Certificate Restore .
iii To choose a location for the request file, click Browse.
Issue 1
Flashing Completed message is displayed.
Phoenix , choose File→Scan Product .
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Page 6 –39