RM-180
Disassembly/Reassembly Instructions
7.
Remove the MMC door from the A-Cover.
8.
Insert SRT-6 between the Antenna Cover and the Chassis Assy, and open the Antenna Cover clips.
Note:
Additional force may be required to open the clips.
9.
Use the tweezers to remove the Power Button.
10. Protect the Camera Rear Bezel Assy with a plastic film before turning the unit.
11. Unscrew the 6 Torx size 6 plus screws in the order shown.
Note:
When reassembling, use the reverse order and the torque of 25 Ncm.
Issue 1
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Page 5 –7