Front Wheel - Honda NC700X Owner's Manual

Tyre Puncture u
(NC700XA only)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙

Front Wheel

Removal
1. Park on a firm, level surface.
2. Cover both sides of the front wheel and
brake caliper with protective tape or
cloth.
Tape or Mounting
cloth bolts
Brake
caliper
Pulser ring (NC700XA only)
84
Removing Wheels
Wheel speed sensor
(NC700XA only)
3. On the right side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
u
the disc or pad surfaces.
u Do not pull the brake lever or push the
brake pedal while the brake caliper is
removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.