Honda NC700X Owner's Manual page 63

Oil filter
8. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
10. Replace the sealing washer. Install the
Rubber seal
11. Fill the crankcase with the recommended
12. Check the oil level.
13. Check that there are no oil leaks.
14. Install the lower cowl.
Engine Oil u Changing Engine Oil & Filter
drain bolt and tighten.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
oil ( ) and install the oil fill cap/
P. 45
2
dipstick.
Required oil
When changing oil &
engine oil filter:
3.4 litres (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.1 litres (3.3 US qt, 2.7 Imp qt)
2
P. 56
59