Honda NC700X Owner's Manual page 89

4. Loosen the axle pinch bolt.
5. Support your motorcycle securely and
raise the front wheel off the ground
using a maintenance stand or a hoist.
6. On the left side, loosen and withdraw
the front axle shaft, and remove the side
collars and wheel.
Axle pinch bolt
Front axle shaft
Tyre Puncture
Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel
between the fork legs and insert the
front axle shaft to the end, through the
left fork leg and wheel hub.
3. Tighten the axle shaft.
Torque: 74 N·m (7.5 kgf·m, 55 lbf·ft).
u Removing Wheels
continued 85