Honda NC700X Owner's Manual page 72

Drive Chain u Checking the Drive Chain Slider
❙
Checking the Drive Chain Wear
Check the chain wear label when adjusting
the drive chain. If the allow mark on the
chain adjuster plate enters the red zone on
the label after the chain has been adjusted to
the proper slack, the chain is excessively
worn and must be replaced.
Chain: DID 520V0 or RK 520MKO
If necessary have the drive chain replaced by
your dealer.
68
Checking the Drive Chain Slider
Check the condition of the drive chain slider.
The drive chain slider need to be replaced if it
is worn to the wear limit line.
If necessary have the drive chain slider
replaced by your dealer.
Red zone
Arrow mark
Drive chain slider
Wear limit
line
Wear limit
line