Netpower Pack Contents; Introduction - Systemline S7 NetPower Amplifier Instruction Manual

1.0 NetPower pack contents

1.1 NetPower x 1
1.2 Bridged mode link x 1
1.3 Mounting brackets x 2
1.4 Mains cable x 1
1.5 Operating manual x 1

2.0 Introduction

The NetPower is a stereo audio power amplifier for use in installed audio systems. It has line level
inputs, directly connected line outputs, and can drive one or two pairs of loudspeakers with a
combined impedance down to 4Ω.
On the rear panel there is a screwdriver-adjustable gain control. There is also a mode switch which
allows the user to select the method of standby switching – using an opto-isolated DC trigger
input, or audio signal sensing. There is also a conventional standby switch on the front panel.
5