Mounting The Monitor - HP LP2480zx User Manual

3. Pull up on the monitor display panel (2) to remove it from the base.
Figure 3-11

Mounting the Monitor

The HP Quick Release can be removed from the pedestal base and installed on a mounting fixture. It
allows you to quickly and securely attach the monitor panel to the mounting fixture.
1. Remove the monitor panel from the pedestal base. Refer to
on page 15
CAUTION:
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are
required (not provided with the monitor). Longer screws must not be used because they may
damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with the monitor.
WARNING!
wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the
instructions supplied with the wall-mounting fixture and check that it is capable of supporting the
monitor.
16 Chapter 3 Setting Up the Monitor
Downloaded from ManualMonitor.com Manuals
Removing the Monitor from the Pedestal Base
in the previous section.
This monitor supports the VESA industry standard 100 mm mounting holes. To attach
To reduce the risk of personal injury or of damage to the equipment, check that the
Removing the Monitor Pedestal Base