HP LP2480zx User Manual page 33

Table 4-2
Icon
Downloaded from ManualMonitor.com Manuals
OSD Menu (continued)
Main Menu Submenu
Horizontal OSD Position
Vertical OSD Position
Function Control
Monitor Status Message
Warning Messages
Calibration Limit
OSD Button Labels
Mode Display
OSD Transparency
OSD Timeout
OSD Rotation
Video Input
Control
DVI-1 Analog/Digital
DVI-2 Analog/Digital
HDMI
DisplayPort
Component
S-Video
Composite
Input Auto-Switching
Information
Current Settings
Description
Changes the viewing position of the OSD menu to the left or right
area of the screen. The factory default range is 50.
Changes the viewing position of the OSD menu to the top or
bottom area of the screen. The factory default range is 50.
Selects the operation of the front panel Function button. The
options are Color Space, Brightness, Color Temp, Reset to Last,
Black Level, OverDrive, Custom Scale, Crop (L-C-R), and PIP
Control.
Disables or enables the Power-On Status Display and selects the
position the OSD message is displayed on the screen.
Enables or Disables OSD recommendation messages.
Sets the limit (in backlight hours) for the calibration message. The
range is 0 to 5,000 hours. The factory default is 1000 hours. A
value of 0 disables the timer. The number of backlight hours since
the last calibration is also displayed.
Disables or enables the front panel button label display on the
screen.
Disables or enables the mode display information that is displayed
on the bottom of the main menu.
Adjust to view the background information through the OSD.
Sets the time duration in seconds that the OSD is visible after the
last button is pressed. The range is 10 – 60 seconds. The factory
default is 40 seconds.
Rotates the OSD menus and messages to support the monitor's
Pivot feature. The choices are 0 and 90 degrees.
Provides a menu of the input options. The default input selection
is DVI-I 1.
Selects DVI-I 1 as the primary video input. This input accepts
either analog or digital signals.
Selects DVI-I 2 as the primary video input. This input accepts
either analog or digital signals.
Selects HDMI as the primary video input.
Selects DisplayPort as the primary video input.
Selects Component as the primary video input.
Selects S-Video as the primary video input.
Selects Composite as the primary video input.
Enables or disables the monitor automatically switching to an
active input if the current signal is inactive. The factory default is
Enabled.
Selects and displays important information about the monitor.
Provides the current input video mode.
Adjusting the Monitor Settings 27