OSD Menu Selections
The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.
After changing an OSD menu item, and if the menu screen has these options, you may choose to:
Cancel—to return to the previous menu level.
Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and
Return option is only active if you change a menu item.
Reset—to change back to the previous setting.
Chapter 4 Operating the Monitor
Downloaded from ManualMonitor.com Manuals
Primaries and Gamma
Reset to Factory
Reset to Last Calibration Returns Color Space preset to the last calibrated settings.
Displays the Color Space presets.
For each Color Space preset, the RGB primaries, WhitePoint,
Gamma, and Luminance are listed. Presets set up at the factory
can be reset to factory calibration. Presets set up by the user can
be reset to the last calibration.
Factory-calibrated preset with the full color gamut and native white
point supported by the panel/backlight.
Factory calibrated preset for the Adobe-RGB standard.
Factory calibrated preset for the SMPTE-C standard.
Factory calibrated preset for the sRGB standard.
Factory calibrated preset for the Rec. 709 standard.
Factory calibrated emulation preset for the DCI-P3 standard. Note
the monitor's color gamut does not fully enclose the DCI-P3 color
User-calibrated preset that must be set up before use.
Adjusts the Luminance/Brightness level of the screen. The control
range is 50 – 250 cd/m
with a step size of 1 cd/m
Adjust the WhitePoint/Color Temp level of the screen. The control
range is 4000 – 12,000 K with a step size of 100.
Displays Primaries and Gamma information for the active Color
Returns Color Space preset to the factory calibrated settings.
Adjusts the screen image.
Automatically adjusts the screen image.
Adjusts the position of the screen image left and right.
Adjusts the position of the screen image up and down.
Selects the method on how displayed information on the monitor
will be formatted. Select: