Figure 8-New Power Supply Installed In Sca80(Q); Figure 9-Close Up Of Assembled Circuit Board - DYNACO SCA-80 Assembly Manual

Figure 8-New Power Supply Installed in SCA80(Q)

If the voltages check out in the previous step, then:
1. Remove the AC plug from the wall outlet.
2. Wait one minute to allow the caps to discharge.
3. Put the top back on, and re-install the five screws that hold it in place.
4. Reinstall the SCA-80 to your music system.

Figure 9-Close up of Assembled Circuit Board

Page 13 of 15