Quick Reference Chart; Monitor; Scan; Call Alert - Midland X-Tra Talk GXT1000 Series Owner's Manual

Midland radio gmrs/frs radio owner's manual
Hide thumbs Also See for X-Tra Talk GXT1000 Series:
Table of Contents

Advertisement

Model GXT1000/1050 Series
GXT1000/1050 SERIES QUICK REFERENCE CHART
MENU
Channel
Group Mode
1~50
Press and hold the
MENU
MENU button for
5 seconds
WX Scan
1~10
WX Channel
1~10
WX Alert
On/Off

MONITOR

Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.

SCAN

Your GXT1000/1050 Series can scan all 50 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 50 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the

CALL ALERT

Your GXT1000/1050 Series can transmit a call alert for a fixed length
of time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
The GXT900 has 10 call alert selections while the GXT950 has 15 call
alerts including 5 "animal sound" call alerts - Cougar, Duck, Crow,
Wolf, Turkey.
Page 10
Group Code
On
Off
0~142
Power
Privacy
H/M/L
Off
Whisper
CTCSS
1~38
On/Off
1~104
DCS
*** Only on Ch 1 ~ 22
ID Setting
Ring Tone
Caller ID
4 digit code (0~9),
Press MON to
1~10
choose each digit
Roger Beep
eVOX
Silent Operation
On/Off
oF~9
On/Off
Dual Watch
Dual Watch
Channel
Privacy
Off
1~50
DUAL WATCH FUNCTION
button.
/
www.midlandradio.com
Press and hold
the DOWN
button for 5
seconds
SOS
0~5
1~15 for GXT1050
Call Tone
Vibrate
On/Off
1~10
*** Only on Ch 1 ~ 22
DCS
CTCSS
1~38
1~104

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents