External Speaker/Microphone Jack; Installing The Belt Clip - Midland GXT-400 Owner's Manual

Model GXT-400

EXTERNAL SPEAKER/MICROPHONE JACK :

Your GXT-400 can be used with an optional external speaker/micro-
phone or headset, freeing your hands for other tasks. To use an
optional / speaker / microphone or headset:
· Insert the plug(s) into the SPK/MIC [20] jacks
· Place the earbud into your ear, and adjust the
mic into your desired position.

INSTALLING THE BELT CLIP :

To install the BELT CLIP, slide the clip
down into the slot on the back of the
radio until the BELT CLIP LATCH clicks.
To remove the BELT CLIP, press the
LOCK TAB down , then gently pull the
belt clip up toward the top of the radio.
Page 13
BELT CLIP
LOCK TAB
BELT CLIP
LATCH
www.midlandradio.com
®