Lcd Monitor; Genlock - Panasonic AJ-SPX900E Operating Instructions Manual

8-2-6 LCD MONITOR

Items/ Adjustable
Data Saved Range
BRIGHTNESS –7
:
+0
:
– C U F – +7
COLOR LEVEL –7
:
+0
:
– C U F – +7
CONTRAST –7
:
+0
:
– C U F – +7
BACKLIGHT HIGH
NORMAL
– C U F –
SELF SHOOT NORMAL
MIRROR
– C U F –
ASPECT CONV. LT.BOX
SQUEEZE
– C U F –
Downloaded From CamcorderManual.com Panasonic Manuals
Remarks
Adjust the LCD monitor brightness.
Adjust the LCD monitor chroma level.
Adjust the LCD monitor contrast.
Select whether or not to set the LCD monitor
brightness to always high.
HIGH: Set to always high.
NORMAL: The brightness changes
according to the BRIGHTNESS
setting.
Select whether or not to change the LCD
monitor to mirror image.
NORMAL: Do not change to mirror image.
MIRROR: Change to mirror image.
Select a screen ratio for images displayed
on the LCD monitor.
LT.BOX: Display images in the letter box
size.
SQEEZE: Display images in the squeeze size.
<Note>
This item is enabled only when ASPECT
described in [8-2-1 SYSTEM MODE] is set
to16:9.

8-2-7 GENLOCK

Items/ Adjustabl
Data Saved e Range
GENLOCK INT Switch the camera synchronising signal.
EXT INT: Synchronise with the internal reference
signal regardless of the reference
26P EXT
signal input to the GENLOCK IN
terminal.
EXT: Synchronise with the reference signal
input to the GENLOCK IN terminal.
26P EXT:
Synchronizes to the signal input via the
26-pin connector.
– C U F E
H PHASE –50 Perform coarse phase adjustment for
horizontal hold when configuring a system.
COARSE :
+00
:
– – – – – +50
H PHASE FINE –160 Perform fine phase adjustment for horizontal
hold when configuring a system.
:
+000
<Note>
:
This adjustment simultaneously shifts the SC
+160
phase.
– – – – –
SC PHASE 0 Perform coarse SC PHASE adjustment when
GENLOCK is set.
COARSE 1
:
3
– – – – –
SC PHASE –75 Perform fine SC PHASE adjustment when
FINE : GENLOCK is set.
+00
<Note>
:
When adjusting GENLOCK, please adjust H
+75
PHASE first, and then adjust SC PHASE.
– – – – –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
103
8