Remote Operation - Panasonic KX-TGE432 Operating Instructions Manual

Answering System
n By entering a phone number:
1
MMENUN#338
2
MbN: "Notification to" a
MSELECTN a MADDN
3
MbN: "Manual" a MSELECTN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN a MSELECTN a
MOFFN
Turning on/off the new message alert
setting
1
MMENUN#338
2
MbN: "On/Off" a MSELECTN
3
MbN: Select the desired setting. a
MSAVEN a MOFFN
Editing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MSELECTN
3
MMENUN a MbN: "Edit" a MSELECTN
4
Edit the name if necessary (16 characters
max.). a MOKN
5
Edit the phone number if necessary (24
digits max.). a MOKN a MSELECTN a
MOFFN
Erasing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MSELECTN
3
MMENUN a MbN: "Erase" a MSELECTN
4
MbN: "Yes" a MSELECTN a MOFFN
R The new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 45) to play the
new message from the new message alert
call. This is so that unauthorized parties
For assistance, please visit http://shop.panasonic.com/support
44
TGE43xUS(en)_1112_ver021.pdf 44
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
MMENUN#338
2
MbN: "Remote code" a MSELECTN
3
MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
Enter the remote access code
(page 45) during the announcement.
2
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
2015/11/12 10:12:57