Call Share; Intercom - Panasonic KX-TGE432 Operating Instructions Manual

Call share

You can join an existing outside call.
Handset
To join the conversation, press M
the other unit is on an outside call.
Base unit *1
*1 KX-TGE440 series: page 3
To join the conversation, press MZN when the
handset is on an outside call.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 32).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
*1 KX-TGE440 series: page 3
Handset
1
During an outside call, press MMENUN.
2
MbN: "Intercom" a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
R If you select "Voice paging", the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
4
Wait for the paged party to answer.
R If the paged party does not answer,
press MBACKN to return to the outside
call.
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conference" a
MSELECTN
For assistance, please visit http://shop.panasonic.com/support
TGE43xUS(en)_1112_ver021.pdf 19
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: "Hold" a
N when
MSELECTN
To resume the conference: MMENUN
a MbN: "Conference" a MSELECTN
R To cancel the conference: MMENUN a
MbN: "Stop conference" a
MSELECTN
You can continue the conversation
with the outside caller.
*1
Base unit
*1 KX-TGE440 series: page 3
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
*1
3
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Making/Answering Calls
2015/11/12 10:12:56
19