Handset Locator; Cell Locator; Intercom; Making An Intercom Call - Panasonic KX-TGE432 Operating Instructions Manual

Making/Answering Calls

Handset locator

You can locate a misplaced handset by
paging it.
1
Base unit: Press MLOCATORN or
MHANDSET LOCATORN.
R All registered handsets beep for 1
minute.
2
To stop paging:
Base unit:
Press MLOCATORN or MHANDSET
LOCATORN.
Handset:
n KX-TGE430 series: page 3
Press MOFFN.
n KX-TGE440 series: page 3
Press M N, then press MOFFN.

Cell locator

This feature allows you to locate a misplaced
cellular phone by pressing the MLOCATES
CELLN button on the base unit and calling
your cellular phone. You must assign your
cellular phone's phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
1
MMENUN#248
R If you have already stored a cellular
phone number, the current number is
displayed.
2
Enter your cellular phone number. a
MSAVEN a MOFFN
Erasing the number
1
MMENUN#248
2
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
20
TGE43xUS(en)_1112_ver021.pdf 20
Calling the misplaced cellular
phone
Base unit: MLOCATES CELLN
R To stop calling:
– KX-TGE430 series: press MLOCATES
CELLN again.
– KX-TGE440 series: press MZN.
Important:
R While the base unit is calling the cellular
phone, the outside line is used.
– KX-TGE430 series: Even if the cellular
phone answers, you cannot talk with the
cellular phone and the base unit beeps
for 1 minute. To end the call, press
MLOCATES CELLN on the base unit.
– KX-TGE440 series: When the cellular
phone answers, you can talk with the
cellular phone. To end the call, press
MZN on the base unit.
Charges may be incurred if the cellular
phone answers the call.

Intercom

Intercom calls can be made:
– between handsets
– between a handset and the base unit
*1 KX-TGE440 series: page 3
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds.
– Handset: To finish intercom, press
MOFFN. To answer the call, press M
– Base unit: To finish intercom, press
MZN. To answer the call, press MZN
again.

Making an intercom call

Handset
1
MMENUN a MbN: "Intercom" a
MSELECTN
*1
N.
2015/11/12 10:12:56