Introduction For The Single Serve Side; Before Using For The First Time - Bella 14405 Instruction Manual

Control Panel

Introduction For The Single Serve Side

• This Coffee Maker single-serve side uses a pressurized system to brew a perfect single hot beverage.
• The adjustable drip tray accommodates most cup sizes, mugs, tall travel mugs or tumblers.
• Use the ground coffee adaptor (included) to create special blends of your favorite coffee. For added
personalization, add a dash of your favorite spice, from cinnamon, orange peel, cardamom or vanilla bean
to name a few.
• Using the reusable ground coffee adaptor is an environmentally-friendly choice that will also save
you money!

Before Using For The First Time

CAUTION: To protect against electrical shock, do not immerse the Coffee Maker or allow the power cord to
come into contact with water or other liquids.
1. Remove all packing material and labels from the inside and outside of the Coffee Maker Place the unit on
a flat, clean surface.
2. Before use, thoroughly clean the glass carafe with lid, removable filter holder, permanent 12 cup coffee
filter and both adaptors with warm soapy water. Rinse and dry.
3. To clean the inside of the unit, it is recommended to brew two full cycles of water only on both sides.
CARAFE SIDE
1. Clean the inside of the Coffee maker by brewing 2 full carafes of tap water (see "setting up the machine").
Do not add the permanent coffee filter or ground coffee for this initial cleaning.
NOTE: At the end of the first cycle, allow 15 minutes for the coffee maker to cool.
2. Brew a second carafe of fresh water.
3. Wait an additional 15 minutes to allow the coffee maker to cool before brewing your first carafe of coffee.
SINGLE SERVE SIDE
1. Using the desired cup, mug, or tumbler as your measure, add water to the water tank.
2. Select the desired height for the drip tray, depending on the size of the cup, mug, or tumbler being used.
3. Place the empty cup, mug, or tumbler in position on the drip tray cover.
NOTE: Do not add any adaptor for this initial cleaning.
4. Press either the GROUND COFFEE or CAPSULE button.
5. The red HEATING indicator light will begin to flash as the Coffee Maker begins heating the water.
6. When water has reached the optimum temperature, the HEATING light will go out and the blue BREWING
light will illuminate. Water will begin to stream through the nozzle. At the end of the cycle, the Coffee
Maker and all indicator lights will automatically turn OFF.
IMPORTANT: Repeat this process twice to thoroughly clean the machine before using for the first time.
Unplug the Coffee Maker when not in use.
6