Brew Strength Selection; Setting The Auto Start; Pause And Serve - Bella Pro Series Black Stainless Steel 9006 Instruction Manual

BREW STRENGTH SELECTION

1. To select the strength of coffee push on the strength button.
2. For regular strength press once.
3. For gourmet strength press twice.The gourmet setting adjusts the brewing cycle of a full
pot of coffee to extract a higher percent of solubles. This results in a more flavorful pot
of coffee.
4. For bold strength press three times.The Bold setting adjusts the brewing cycle of a full pot
of coffee, allowing more time for the coffee to "steep" to extract further oils and flavor from
the coffee bean. This results in a bolder tasting pot of coffee
5. For 1-4 cup mode press 4 times. Automatically adjusts the brewing process for maximum
flavor when brewing small quantities. Ideal for brewing 1 to 4 cups of coffee.
* If 14 cups of water are poured into the water tank then 14 cups of coffee will brew.

SETTING THE AUTO START

Press the PROGRAM button. The clock will flash 12:00 AM. Follow the clock setting method to set
hour and minute. To confirm your selection, press the program button. The unit will beep and
display the current time along with the word PROGRAM. Once the current time reaches the set
time for the auto brew, the unit will automatically start the brewing cycle.

PAUSE AND SERVE

If you wish to serve a cup of coffee before the brew cycle is complete, simply remove carafe from
the warming plate. Dripping will automatically cease. Return the carafe onto the warming plate;
dripping will resume.
CAUTION: To prevent injury when utilizing the pause and serve feature, replace carafe within 30
seconds after removing
during the brewing process.
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed
and the coffee will stop dripping.
2. The flow valve is located on the bottom of the filter holder and is activated when the carafe
is removed. (See Figure 1.) This design makes it possible for you to remove the carafe and
12