Interchangeable Attachments; Guide To Using This Manual - Stihl FCS Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

English
Interchangeable
Attachments
+
+
The STIHL interchangeable attachment
may be mounted to different STIHL
power tools.
The approved power tool models are
listed in the chapter on "Approved Basic
Power Tools".
In this instruction manual the functional
unit formed by the basic power tool and
interchangeable attachment is referred
to as the power tool.
Therefore, the separate instruction
manuals for the basic power tool and
attachment should be used together for
the power tool.
Always read and and make sure you
understand both instruction manuals
before using your power tool for the first
time and keep them in a safe place for
future reference.
2

Guide to Using this Manual

Pictograms
All the pictograms attached to or
embossed on the machine are shown
and explained in this manual.
Symbols in Text
Many operating and safety instructions
are supported by illustrations.
. .
. .
The individual steps or procedures
described in the manual may be marked
in different ways:
A bullet marks a step or procedure.
N
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration. Example:
Loosen the screw (1).
N
Lever (2) ...
N
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
following symbols and signal words:
DANGER
Indicates an imminent risk of severe or
fatal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in severe or
fatal injury.
NOTICE
Indicates a risk of property damage,
including damage to the machine or its
individual components.
Engineering Improvements
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. Therefore,
some changes, modifications and
improvements may not be covered in
this manual. If the operating
characteristics or the appearance of
your machine differs from those
described in this manual, please contact
your STIHL dealer or the STIHL
distributor for your area for assistance.
FCS

Advertisement

Chapters

Table of Contents
loading

Table of Contents