Specifications; Maintenance And Repairs - Stihl FCS Instruction Manual

Definitions
1 Cutting Blade
Metal cutting blade for cutting
weeds, grass, etc.
2 Deflector
Designed to reduce the risk of injury
from foreign objects flung
backwards toward the operator by
the cutting attachment and from
contact with the cutting attachment.
3 Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.
4 Depth Wheel
Deflector-mounted depth wheel
rolls on ground and keeps edger
cutting blade at preset height for
required depth of cut.
5 Wingnut
Must be loosened to shift the wheel
to adjust the depth of cut.
6 Gearbox
Reduces input speed to required
axle speed.
7 Wear Guard
Protects the gearbox from wear.
8 Skirt
Designed to reduce the risk of injury
from foreign objects flung back
towards the operator by the blade.
FCS

Specifications

Weight
Attachment: 4.2 lbs (1.9 kg)

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
Except for the emissions control
systems and parts, which are governed
by the Federal Emission Control
Warranty provided elsewhere in this
manual. Warranty claims following
repairs can be accepted only if the repair
has been performed by an authorized
STIHL servicing dealer using genuine
STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.
English
21