Menus For Other Camera Settings - Olympus FE-5020 Instruction Manual

Select the settings for the functions while referring to "Using the Menu" (p. 3).

Menus for Other Camera Settings

Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E
SETUP MEMORY FORMAT/FORMAT
Before formatting, check that no important
data is left in the internal memory or card.
Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use.
Submenu 2
Completely erases the image data
YES in the internal memory
(including protected images).
NO Cancels formatting.
Be sure to remove the card before formatting the
*1
internal memory.
Copying images in the internal memory
to the card [BACKUP]
E
SETUP BACKUP
Submenu 2
Backs up image data in the
YES
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check
that the battery has suffi cient power before
starting the backup.
Changing the display language [W]
E W
SETUP
"Changing the display language" (p. 13)
Submenu 2
The language for the menus and
Languages error messages displayed on the
*1
monitor is selected.
The available languages vary depending on the
*1
country and/or region where the camera was
purchased.
Application
or card
*1
Application
Application
Adjusting the CCD and the image
processing function [PIXEL MAPPING]
E
SETUP PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the B button when [START]
(Submenu 2) is displayed.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
Turning on the camera with the K or
q button [K/q]
E
SETUP K/q
Submenu 2
Pressing K turns on the camera
and starts the camera in the
shooting mode.
YES
Pressing q turns on the camera
and starts the camera in the
playback mode.
The power is not turned on. To turn
on the camera, press the n
NO
button.
Application
EN 31