Table of Contents
Advertisement
Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Menus for Other Camera Settings
These settings can be made from the shooting mode top menu or playback mode top menu.
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E
SETUP MEMORY FORMAT/FORMAT
Before formatting, check that no important data
is left in the internal memory or card.
Non-Olympus cards and cards that have been
formatted by a computer must be formatted
with this camera before use.
Submenu 2
Completely erases the image data
YES
in the internal memory
(including protected images).
NO
Cancels formatting.
Be sure to remove the card before formatting the
*1
internal memory.
Copying images from the internal
memory to the card [BACKUP]
E
SETUP BACKUP
Submenu 2
Backs up image data from the
YES
internal memory to the card.
NO
Cancels the backup.
It takes some time to back up data. Check that
the battery has sufficient power before starting
the backup.
Application
or card
*1
Application
Changing the display language [W]
E
SETUP W
"Changing the display language" (p. 13)
Submenu 2
The language for the menus and
Languages
error messages displayed on the
*1
monitor is selected.
The available languages vary depending on the country
*1
and/or region where the camera was purchased.
Setting the startup display screen and
sound when the camera is turned on
[PW ON SETUP]
E
SETUP PW ON SETUP
Submenu 2 Submenu 3
OFF
1
SCREEN
2
OFF (No
VOLUME
sound)/LOW/
HIGH
This image cannot be changed.
*1
To register a startup image
1 Select [2] in submenu 3 for [SCREEN].
2 Use CD to select the image to be
registered, and press the E button.
Application
Application
No image is displayed.
A preset image
is
*1
displayed.
A still image stored in the
internal memory or card is
registered for display. (This
option leads to the setup
screen.)
The volume of the startup
sound is selected.
EN
37
Advertisement
Table of Contents
