Menus For Other Camera Settings - Olympus FE-360/X-S7S/C-S70 Instruction Manual

Digital camera
Table of Contents

Advertisement

_
Make the settings for the functions while referring to "Using the Menu" (p. 3).
Menus for Other Camera Settings
Erasing data completely
[MEMORY FORMA 1]/[FORMA1]
VT
SETUP .. MEMORY FORMAT/FORMAT
,
,
,
Adjusting the CCD and the image
processing function [PIXEL MAPPING}
VT
SETUP" PIXEL MAPPING
'I
Be sure to remove the card before formatting the
internal memory,
Pressing
~/O
turns on the
camera and starts the camera in
the shooting mode,
Pressing
[B
turns on the camera
and starts the camera in the
playback mode,
/; This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase, Approximately
once a year is recommended,
/) For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping, If the camera is
turned off during pixel mapping, be sure to
perform it again,
To adjust the CCO and to adjust the
image processing function
Press the
~
button when [START]
(Submenu 2) is displayed,
• The camera checks and adjusts the CCO and the
image processing function at the same time,
YES
Turning
on
the camera with the S!?IO
or!B button [OS!?/!B}
VTSE}~UP~.Q~/IE
Backs up image data in the
internal memory to the card,
Cancels the backup,
Cancels formatting,
Completely erases the image data
in the internal memory'l or card
(including protected images),
/>
It takes some time to back up data, Check
that the battery has sufficient power before
starting the backup,
/' Before formatting, check that no important
data is left in the internal memory or card,
/) Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use,
NO
YES
NO
YES
Copying images in the internal memory
to the card [BACKUP}
VT
SET~P
..
8J\CK~g
Changing the display language
[.~}
ytSETUP~
.,@
NO
The power is not turned on, To turn
on the camera, press the
POWER
button,
I,
"Changing the display language" (p. 13)
The language for the menus and
Languages'l
error messages displayed on the
monitor is selected,
'I
The available languages vary depending on the
country and/or region where the camera was
purchased,
EN
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe-20/x-is/c-2sFe-360X-s7sC-s70Fe-20X-is ... Show all

Table of Contents