Starting Procedure; Selecting Files From The File Name List; Aux Source; Setting The Video Signal - Pioneer MVH-AV285BT Owner's Manual

Bluetooth audio
player
p By pressing the or button, you can also skip files
forwards or backwards.
p By pressing and hold the or
perform fast reverse or fast forwards.
p Before using the Bluetooth audio player, register and con-
nect the device to this product.
 Registering your Bluetooth devices on page 7
p Depending on the Bluetooth device connected to this prod-
uct, the available operations with this product may be limited
or differ from the descriptions in this manual.
p While you are listening to songs on your Bluetooth device,
please refrain from operating the phone function as much as
possible. If you try operating, the signal may cause noise for
song playback.
p When you are talking on the Bluetooth device connected to
this product via Bluetooth, it may pause playback.

Starting procedure

1 Display the "System" setting screen.
2 Touch [AV Source Settings].
3 Confirm that "Bluetooth Audio" is turned on.
4 Press .
5 Touch [Bluetooth Audio].
Selecting files from the file
name list
p This function may not be available depending on some
Bluetooth device.
1 Touch .
2 Touch a file or a folder on the list to play back.
18

AUX source

button, you can also
AUX
Switches between the screen to
operate video files and that to
operate music files.
is only available when there are both audio and video
p
files on the auxiliary equipment.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
 External video component and the display on page 28
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Confirm that "AUX Input" is turned on.
3 Press .
4 Touch [AUX].
The image is displayed on the screen.
Hides the touch panel keys.
To display again the keys,
touch anywhere on the screen.
21 48
Full

Setting the video signal

When you connect this product to an AUX equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AUX input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.