Connecting A Registered Bluetooth Device Manually; Switching Visibility; Entering The Pin Code For Bluetooth Wireless Connection; Displaying The Device Information - Pioneer MVH-AV285BT Owner's Manual

Registration and connection of Bluetooth device
Connecting to a Bluetooth device
automatically
This function connects the last connected Bluetooth device to
this product automatically as soon as the two devices are less
than a few metres apart.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [Auto Connect] to switch "On" (default)
or "Off".
Deleting a registered device
CAUTION
Never turn this product off while the paired Bluetooth device
is being deleted.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [Connection].
3 Touch .
Connecting a registered
Bluetooth device manually
Connect the Bluetooth device manually in the following cases:

Two or more Bluetooth devices are registered, and you want
to manually select the device to be used.
 You want to reconnect a disconnected Bluetooth device.
 Connection cannot be established automatically for some
reason.
1 Activate the Bluetooth wireless technology on
your devices.
2 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
3 Touch [Connection].
4 Touch the name of the device that you want to
connect.
8

Switching visibility

This function sets whether or not to make this product visible to
the other device.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [Visibility] to switch "On" (default) or
"Off".
Entering the PIN code for
Bluetooth wireless connection
To connect your Bluetooth device to this product, you need to
enter a PIN code.
You can change the PIN code with this function.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [PIN Code Input].
3 Touch [0] to [9] to input the pin code (up to
8 -digits).
4 Touch .
p The default PIN code is "0000".
Displaying the device
information
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [Device Information].
The device name and address of the Bluetooth device and this
product are displayed.

Clearing the Bluetooth memory

p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
CAUTION
Never turn this product off while the Bluetooth memory is
being cleared.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [Bluetooth Memory Clear].
3 Touch [Clear].
The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest
Bluetooth software. For details on Bluetooth software and updat-
ing, refer to our website.
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p You need to store the version up file to the USB storage
device in advance.
CAUTION
Never turn this product off and never disconnect the phone
while the software is being updated.
1 Connect the USB storage device stored the
version update file to this unit.
 Plugging and unplugging a USB storage device on page 5
2 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
3 Touch [BT Software Update].
4 Touch [Start].
Follow the on-screen instructions to finish updating the
Bluetooth software.
Displaying the Bluetooth soft-
ware version
If this product fails to operate properly, you may need to consult
your dealer for repair.
In such cases, perform the following procedure to check the
software version on this unit.
1 Display the "Bluetooth" screen.
 Displaying the "Bluetooth" screen on page 7
2 Touch [BT Version Info.].
The version of this product's Bluetooth module appears.