Appradio Mode; Using Appradio Mode; Starting Procedure - Pioneer SPH-DA230DAB Operation Manual

AppRadio Mode +

You can operate iPhone or smartphone applications with finger gestures such as
tapping, dragging, scrolling, or flicking on the screen of this product.
NOTES
• The compatible finger gestures vary depending on the application for an iPhone or a smartphone.
• Even though an application is not compatible with AppRadio Mode +, depending on the application
an image may be displayed. But you can not operate the application. To use AppRadio Mode +, install
the AppRadio app on the iPhone or smartphone in advance. For details about the AppRadio app, visit
the following site:
http://www.pioneer-car.eu/eur/appradiomode
• Be sure to read Using app-based connected content (page 52) before you perform this operation.
• Copyright protected files such as DRM cannot be played.
• AppRadio Mode + may be referred to as AppRadio Mode.
WARNING
• Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions.
• If in doubt as to a particular function, only perform it while the car is parked.
• No feature should be used unless it is safe to do so under the driving conditions you are experiencing.

Using AppRadio Mode +

Important
• Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.
• The content and functionality of the supported applications are the responsibility of the App
providers.
• In AppRadio Mode +, functionality through the product is limited while driving, with available
functions determined by the App providers.
• Availability of AppRadio Mode + functionality is determined by the App provider, and not
determined by Pioneer.
• AppRadio Mode + allows access to applications other than those listed (subject to limitations while
driving), but the extent to which content can be used is determined by the App providers.

Starting procedure

When connecting an iPhone or a smartphone to this product, the settings are
automatically configured according to the device to be connected. For details of the
available connection, refer to iPod/iPhone or smartphone connection for AV source
(page 16).
TIPS
• Touch the desired application icon after the AppRadio app is launched.
• If you connect your device to this product while an AppRadio Mode + compatible application is
already running, the application operation screen will appear on this product.
• The desired application is launched, and the application operation screen appears.
• Press to go back to the top menu screen.
AppRadio Mode +
Displays the current source.
Displays the launcher application screen.
Displays the previous screen.
Displays the menu screen.
• Press then touch to hide the AppRadio Mode + SideControlBar.
• Press then touch again to display the AppRadio Mode + SideControlBar again.
• and are not available depending on the type of device.
For iPhone users
1
Connect your iPhone.
Refer to the Installation Manual.
2
Press .
3
Touch .
4
Touch [AppRadio Mode].
5
Touch desired icon in the tab.
The AppRadio app is launched.
13
En