Troubleshooting; Regular Robot Care - iRobot Braava jet Owner's Manual

Troubleshooting

EN
Braava jet will tell you something is wrong by alerting you with
sounds and lights. If the problem is not resolved, learn more online
at www.global.irobot.com.
Repeating Error Messages
If your robot remains on after an error
occurs, press the bumper toward the
body of the robot once to repeat the
message. If your robot has turned off
after an error occurs, press CLEAN to
turn it on. If the error is ongoing, the
robot will repeat the message.
Visit www.global.irobot.com for
additional support.
Rebooting Instructions
For some errors, rebooting Braava jet
may resolve the problem. To reboot
Braava jet, press and hold CLEAN for 5
seconds until you hear an audible tone.
Take out the battery and insert it again.
Press CLEAN again to turn the robot
back on.
16 For more information, visit www.irobot.com/braavajet200
Precision Jet Spray
Troubleshooting
If the robot is not spraying or is spraying
unevenly and you have checked that the
tank has enough water and can hear the
pump running, contact Customer Care.
Water Level Troubleshooting
If you encounter problems with the
amount of water Braava jet uses on your
floors in wet mopping or damp sweeping
modes, download the iRobot HOME App
®
to adjust your robot's settings.

Regular Robot Care

Follow these tips to keep your iRobot Braava jet running at peak
performance. See the About your Braava jet™ section for
reference, as needed.
Cleaning the Cliff Sensors and
Pad Reader
Clean the sensors on the bottom of your
robot with a damp cloth.
Cleaning the Wheels
Pull off any visible debris or hair that
gathers around the wheels.
Cleaning the Body of the Robot
Use a damp cloth to lightly wipe off any
dirt on its body or bumper.
Cleaning the Precision Jet
Spray Nozzle
Wipe clean with a damp cloth.
*Tested in washing machine. Do not wash
with delicates.
Cleaning the Tank
If you notice an odour in the tank, fill
the tank with hot tap water. Do not use
boiling water. Close the cap and lightly
shake the robot. Rinse the tank and
repeat. Allow the tank to dry with the cap
open before using your robot.
Caring for Washable
Cleaning Pads
Braava jet Washable pads can
be washed up to 50 times* before
replacing. Hand washing and air drying
is recommended. If using a washing
machine, wash using the warm cycle and
air dry. Do not wash with delicates.
Braava jet™ Owner's Guide
EN
17