No Factory Keyless Entry After Remote Start; Panic Mode - CrimeStopper cool start RS2-G3 Operating Instructions Manual

NO FACTORY KEYLESS ENTRY AFTER REMOTE START

Most new cars Do Not allow the factory Remote Keyless Entry to function with the Ignition ON. This means
you can't use the factory remote to lock or unlock the doors. After remote start you have to use the keys to
unlock the door. Also, many new vehicles unlock the doors when disarming the factory alarm. This leaves the
doors unlocked while Remote Started. To resolve this problem, have your installer connect the door locks to
the Remote Start Keyless Entry. The Remote Starter will Re-Lock the doors after remote starting.
POWER ON MEMORY
This system is equipped with circuitry that will allow the system to remember its status if the power is lost and
then reconnected.

PANIC MODE

This mode is used in an emergency situation or you are having trouble finding your vehicle in a parking lot.
The vehicle horns must be connected for this option.
To Activate: Press the start button 3 times within 2 seconds. The horns start honking and parking lights flash
for 30 seconds.
To Deactivate: Press the start button again to stop the horns and Lights.
12