Ezoom; Dis - Grundig GCA-B0005B Owner's Manual

- POLARITY (ACTIVE LOW, ACTIVE HIGH): Choose ACTIVE LOW or ACTIVE HIGH to
set in Day Mode the LEDs to OFF and in Night Mode the LEDs to ON. If chosen wrong,
it is the other way round. (This depends on the set polarity, and whether high current
flow means "night" and low current flow means "day" in the external device or the other
way round.)
COLOR:
If set to COLOR, the camera will be fixed to COLOR mode regardless of the ambient
conditions.

6.9. EZOOM

When selecting ↵, the following submenu will appear.

6.10. DIS

DIS [ON, OFF] :
The Digital Image Stabilisation will set the anti-shake compensation.
16
- LOW (000 ~ 255): Set the parameter from
000 to 255 (depending on the difference
between low and high current flow of the
external device) to adjust the sensitivity for
switching to Low Mode.
- HIGH (000 ~ 255): Set the parameter from
000 to 255 (depending on the difference
between low and high current flow of the
external device) to adjust the sensitivity for
switching to High Mode.
When you enter this submenu, the
Electronic Zoom can be adjusted (in/out/left/
right/top/bottom).
- MAG [000 ~ 255]: Here you can choose
how far the camera zooms in.
- PAN [000 ~ 1023]: Here you can move
the zoom picture to the left or right.
- TILT [000 ~ 511]: Here you can choose
the top and bottom position of the zoom
picture.
English