6 Playback
Single-frame playback
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow step 1 below.
1
Press the q (playback) button.
• The LCD monitor turns off after more
than 1 minute if no operations are
performed. The camera will turn off
automatically if there is no operation
after that. (Default setting is 4 hours.)
Turn on the camera again.
The last recorded image appears.
2
Use p to select images you want to view.
a Displays the frame that is stored 10 frames back
b Displays the previous frame
c Displays the frame that is stored 10 frames ahead
• To exit the playback mode, press the q button.
• Pressing the shutter button halfway resumes the shooting mode.
q button
d Displays the next frame
q
6
89