Single-Frame Shooting/Sequential Shooting; Setting Single-Frame/Sequential Shooting - Olympus EVOLT E-330 Advanced Manual

Single-frame shooting/sequential shooting

Single-frame shooting o 1 frame at a time when the shutter button is
Sequential shooting j

Setting single-frame/sequential shooting

3
Press the j (drive) button and set using the
control dial.
o Single-frame shooting
j Sequential shooting
• Press the shutter button fully and keep it
pressed. The camera will take pictures in
sequence until you release the button.
• When settings are made with the j button,
the information is also displayed on the
viewfinder.
Viewfinder
Control panel setting procedure
i p:o (Drive mode)
• Sequential shooting is not possible when [NOISE REDUCTION] (g P. 87)
is set to [ON].
• During sequential shooting, if the battery check blinks due to low battery, the
camera stops shooting and starts saving the pictures you have taken on the
card. The camera may not save all of the pictures depending on how much
battery power remains.
58
pressed (normal shooting mode).
Shoots 4 frames or more at 3 frames/sec. (in SHQ,
HQ or SQ) for as long as the shutter button
pressed. Focus and exposure are locked at the
first frame. (during S-AF, MF)
: Single-frame shooting
:Sequential shooting
MENU [X] [j/</Y]
i
x Notes
j button
Menu setting procedure
Setting