Ae Bracketing - Olympus EVOLT E-330 Advanced Manual

AE bracketing

The camera automatically shoots a number of pictures at different exposure
values for each frame. Even in conditions where correct exposure is difficult to
obtain (such as a backlit subject or a scene at dusk), you can pick the picture
you prefer from a selected number of frames with a variety of different
exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted
in - direction, and picture adjusted in + direction.
Example: When BKT is set to [3F 1.0EV]
-1.0EV
Compensation value: 0.3, 0.7 or 1.0
The exposure compensation value will change if the EV step is changed. The EV
step can be changed using the menu. Exposure compensation value can be
adjusted within a range of ±1.0.
g"EV step" (P. 108)
Number of frames: 3
1
MENU [X] [AE BKT]
2
Use p to set.
[OFF]/[3F 0.3EV]/[3F 0.7EV]/[3F 1.0EV]
3
Press the i button.
4
Start shooting.
Single-frame shooting
Each time the shutter button is pressed
fully, a picture is taken at a different
exposure.
• The setting for the next shot is displayed in
the viewfinder.
Sequential shooting
Hold down the shutter button until the selected number of frames are
taken. The camera shoots each frame at a different exposure.
• Releasing the shutter button stops auto bracketing shooting. When it stops,
[BKT] on the control panel is displayed in blue.
±0
CANCEL
Viewfinder
Auto bracketing
+1.0EV
AE BKT
OFF
3F 0.3EV
3F 0.7EV
3F 1.0EV
SELECT GO
MENU
Exposure
compensation
value of the
next shooting
frame
41
3