Olympus EVOLT E-330 Advanced Manual page 192

Handling and storage precautions
Overseas use
• To use the charger in another country, you may need a conversion plug that
matches the design of the power outlets in that country. To find out what type of
conversion plug or adapter is required, please consult a travel agent. Do not
use an electronic transformer (travel converter) as this will cause malfunction.
LCD monitor
Do not push the monitor forcibly; otherwise the image may become fuzzy,
resulting in a playback mode failure or damage to the monitor. If the monitor
is damaged, be careful not to get any of the liquid crystals from the monitor
in your mouth. If liquid crystals get on your limbs or clothes, wash them off.
A strip of light may appear on the top/bottom of the monitor. This is not a
malfunction.
When a subject is viewed diagonally in the camera, the edges may appear
to zigzag on the monitor. This is not a malfunction; It will be less noticeable
in playback mode.
In places subject to low temperatures, the LCD monitor may take a long
time to turn on or its color may change temporarily. When using the camera
in extremely cold places, it is a good idea to occasionally place it in a warm
place. A LCD monitor exhibiting poor performance due to low temperatures
will recover in normal temperatures.
The LCD monitor is made with high-precision technology. However, black
spots or bright spots of light may appear on the LCD monitor. These spots
may not be uniform in color and brightness depending on their
characteristics or the angle at which you are viewing the monitor. This is not
a malfunction.
Lens
Do not immerse in water or splash with water.
Do not drop or exert strong force on the lens.
Do not hold at the moving part of the lens.
Do not touch the lens surface directly.
13
Do not touch the contact points directly.
Do not subject to abrupt temperature changes.
Do observe the operating temperature limit.
192