Connecting The Camera To A Printer - Olympus EVOLT E-330 Advanced Manual

Direct printing (PictBridge)

Connecting the camera to a printer

Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and plug the
printer end of the USB cable into
the printer's USB port.
• For details on how to turn the printer
on and the position of the USB port,
refer to the printer's manual.
2
Plug the USB cable into the
camera's multi-connector and
turn the camera on.
• The selection screen for the USB
connection is displayed.
8
3
Use p to select [<EASY] or
[<CUSTOM].
If you select [<EASY]
• Go to "Easy printing" (P. 127).
If you select [<CUSTOM]
• [ONE MOMENT] is displayed and
the camera and printer are connected.
Go to "Flowchart for custom printing" (P. 127).
• If the screen is not displayed after a few minutes, turn off the camera and start
again from Step 2.
126
Multi-connector
x Notes