Self-timer shooting
Using the self-timer
Press the shutter button all the way.
• A picture is taken.
• The focus and exposure are locked when the
shutter button is pressed halfway.
• When Y12s is selected:
First, the self-timer lamp lights up for
3
approximately 10 seconds, then it blinks for
approximately 2 seconds and the picture is
taken.
• When Y2s is selected:
The self-timer lamp blinks for approximately 2
seconds, then the picture is taken.
• To cancel the activated self-timer, press the j button.
• Do not press the shutter button while standing in front of the camera; this
could result in the subject being out of focus since focusing is performed when
the shutter button is pressed halfway.
Eyepiece shutter
When shooting without looking through the
viewfinder, turn the eyepiece shutter lever
and close the eyepiece shutter so that the
light does not enter the viewfinder.
60
Self-timer lamp
x Notes
Eyepiece shutter lever