Slave Flash Photography (Qflash) - Olympus DIGITAL CAMERA SP-320 Advanced Manual

Slave flash photography ( Q FLASH)
Selecting the flash (FLASH)
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.
The amount of light emitted by the flash can be adjusted in 10 levels. The flash can
fire in sequential shooting mode, but the interval between shots will be longer if a
high emission level is set.
Flash mode automatically changes to [#] for all flash modes except [$].
Top menu
3
1
Select an emission level from [1]
to [10], then press Z.
46
[MODE MENU] [CAMERA] [QFLASH] [SLAVE]
g"Using the menus" (P. 17)
SLAVE FLASH
1
SELECT
OK
GO