Using A Fl Ash (Flash Photography) - Olympus V207090SU000 Instruction Manual

Using a fl ash
When using a fl ash unit designed for use with the camera, you can choose the fl ash
mode using camera controls and take pictures with the fl ash.
 Attaching Compatible Flash Units
The methods used to attach and operate external fl ash units vary with the unit. See
the documentation provided with the unit for details. The instructions here apply to the
FL-LM3.
• Confi rm that both the camera and fl ash unit are off. Attaching or removing a fl ash unit
while either the camera or fl ash unit is on could damage the equipment.
1
Remove the hot shoe cover and attach the fl ash.
• Slide the fl ash in until the foot clicks into place at the
back of the shoe.
2
Position the fl ash head for bounce-fl ash
photography or direct lighting.
• The fl ash head can be rotated up and left or right.
• Note that fl ash output may be insuffi cient for correct
exposure when bounce fl ash lighting is used.
Rotate the fl ash ON/OFF lever to the ON position.
3
• Rotate the lever to the OFF position when the fl ash is
not in use.
(Flash photography)
Hot shoe cover
ON/OFF lever
2
EN 93