Olympus DIGITAL CAMERA SP-320 Advanced Manual page 154

Troubleshooting
Monitor indication
Y/M/D
CARD SETUP
POWER OFF
FORMAT
SELECT
MEMORY SETUP
POWER OFF
MEMORY FORMAT
SELECT
10
154
Possible cause
When the camera is
used for the first time or
the batteries have been
removed for a long time,
the date and time are on
the factory default
setting.
This card cannot be
used in this camera. Or,
the card is not
formatted.
OK
GO
There is an error in the
internal memory.
GO OK
Corrective action
Set the date/time.
Format the card or replace the card.
• Select [POWER OFF] and press
Z. Insert a new card.
• Select [FORMAT] and press Z.
All data on the card is erased.
Select [MEMORY FORMAT] and
press Z. All data in the internal
memory is erased. Frames and titles
used to compose images are
erased. Use OLYMPUS Master to
add them in again.