Basic Operation; Playing A Cassette - Hyundai TRC 682 AR3 Instruction Manual

BASIC OPERATION

Switching on/off: Save energy
Whether you are using mains or battery supply, to
avoid unnecessary energy consumption always ad-
just the FUNCTION selector to OFF.
1. To select your sound source, adjust the
FUNCTION selector to CD/MP3, TAPE(OFF)
or RADIO.
2. Adjust the sound with VOLUME.
3. To switch off the power, set the FUNCTION
selector to TAPE(OFF) position.
Radio reception
1. Slide the function selector to RADIO.
2. Slide the BAND selector to a desired setting
(FM ST., FM or AM)
3. Rotate the TUNING control to find the desired
stations.
4. If the BAND selector is set to FM ST. and a
station with stereo broadcast is received, the
FM ST. indicator will light up.
When you have finished listening, slide the
FUNCTION selector to the OFF position.

PLAYING A CASSETTE

1. Select TAPE source.
2. Press STOP/EJECT to open the cassette door.
3. Insert a cassette and close the cassette door.
4. Press PLAY to start playback.
5. To interrupt playback, press PAUSE. To resume, press PAUSE again.
6. by pressing FF or REW on the set, fast winding of the tape is possible in both directions.
7. To stop the tape, press STOP/EJECT.
The keys are automatically released at the end of the tape, except if PAUSE has been
activated.
● If FM reception is weak, stereo may be
indicated but the sound may not be good. In
this case, set the BAND selector to FM to
receive in mono only.
● For FM, pull out the telescopic antenna. Incline
and turn the antenna. Reduce its length if the
signal is too strong (very close to a
transmitter).
● For AM the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the set
itself.
ENG - 3