JVC DR-MV1 Instructions Manual page 92

TROUBLESHOOTING
92
EN
Initialising (DVD Deck Only)
Malfunction occurs on the unit.
]Press 1 to turn off the unit, press and hold 1, then press 8
for two seconds or more.
Other Problems
The image of the TV broadcast appears distorted on the TV
screen.
For RF/AV/S-VIDEO connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (
For component video connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (
Whistling or howling is heard from the TV during camcorder
recording.
● The camcorder's microphone is too close to the TV.
]Position the camcorder so its microphone is away from the TV.
● The TV's volume is too high.
]Turn the TV's volume down.
When scanning channels, some of them are skipped over.
● Those channels have been designated to be skipped.
]If you need the skipped channels, restore them. (
The channel cannot be changed.
● Recording or Live Memory recording* is in progress.
]Press 9 to pause the recording, change channels, then press 4
to resume recording.
* DVD deck only
Channel settings that were made manually seem to have
changed or disappeared.
● After the manual settings were made, Auto Channel Set was
performed.
]Perform "Clock Set" (
Downloaded From DvDPlayer-Manual.com JVC Manuals
) lights off on the front display panel.
) lights up on the front display panel.
pg. 83)
pg. 85).
On-screen Message (DVD Deck Only)
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
● The memory is full for registration for the Navigation system. The
recording cannot be started even though the capacity for the
recording is enough. ( pg. 63)
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE
TO REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
● The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
( pg. 63)
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
● A disc that is not registered in the library has been inserted.
Register the disc as necessary. (
INSERT DISC #XXXX
● Appears when a title that has been selected in the library is not
contained in the loaded disc.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
● Recording and/or editing cannot be performed with a loaded
DVD-RAM disc.
● The number of titles exceeds 99.
● The number of play lists exceeds 999.
SET CLOCK BEFORE TIMER PROGRAMMING
● To set the timer programme, the clock must be set in advance.
( pg. 85)
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
● You can programme this unit to timer-record as many as 8
programmes. To programme more, you need to cancel a timer
programme already set. (
CAN NOT SET DISC TIMER PROGRAMMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
DVD-RAM
DVD-RW (VR MODE)
● On-Disc Timer Programming has been attempted when a disc
that is not compatible with the function is loaded. (
NO DISC INSERTED
● On-Disc Timer Programming has been attempted when a disc is
not loaded, or loaded upside down. (
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
● When a playback-only disc or a finalised disc is loaded, 7 has
been pressed. ( pg. 6)
pg. 63)
pg. 47)
pg. 45)
pg. 9, 45)