Scan Mode Set; Tray Lock (Dvd Deck Only) - JVC DR-MV1 Instructions Manual

SUBSIDIARY SETTINGS
88
EN

Scan Mode Set

If you connect the unit and TV with Component Video Connection
( pg. 16), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction of
higher-quality images. For details, refer to "GLOSSARY"
( pg. 94).
ATTENTION:
Your TV needs to be compatible with Progressive PAL.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR/DVD
1
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2
Press PROGRESSIVE SCAN for 3 or more seconds.
● Video output indicator (
Progressive scan mode has been established. (
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
● When the progressive mode is set, be sure to set "L-1 OUTPUT" to
"COMPONENT". (
COMPONENT VIDEO OUT connector.
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video material.
● Scan mode cannot be set while menu screen is displayed.
● When the Progressive scan mode is engaged, no video signal is
output from S-VIDEO OUT connector and L-1 IN/OUT connector.
Watch the image on VCR deck in the Progressive scan
mode via component video
A Set the Progressive-compatible TV to the component input
mode.
B Press VCR/DVD repeatedly so that the DVD lamp lights up
on the unit, then press PROGRESSIVE SCAN for 3 or more
seconds so that the Video output indicator (
display panel.
C Press VCR/DVD repeatedly so that the VCR lamp lights up
on the unit.
D Press VCR].
● "VCR]" lights up on the unit.
NOTES:
● Be sure to engage the DVD deck in stop mode.
● It is not possible to perform the above steps when the DVD deck is
in timer standby mode.
Downloaded From DvDPlayer-Manual.com JVC Manuals
SAT
1 2 3
4 5 6
7 8 9
0
PROGRESSIVE SCAN
) lights on the front display panel if
pg. 13)
pg. 72) Progressive scan is output only from
) lights on the front

Tray Lock (DVD Deck Only)

You can lock the disc tray to prohibit the unwanted disc ejection by
children.
● Turn off the unit.
To lock tray
While the unit is turned off, press and hold 8, then press x on the
unit. "LOCKED" appears on the front display panel and the disc
tray is locked.
To unlock tray
While the unit is turned off, press and hold 8, then press x on the
unit. "UNLOCK" appears on the front display panel.
x 8